Temporary disabling of rating level by dvd disc – Sanyo DVD-L70 User Manual

Page 37

Advertising
background image

-E37-

1

2

If the DVD disc has been designed to temporarily cancel
the Rating level, the screen which appears after inserting
a DVD will change, depending on which disc is played.
“YES” is selected on the screen.

Depending on the disc, a viewer restriction selection
screen is displayed.

3

If you wish to play back a disc, press [ENTER] while
“YES” is selected.
To stop playback, select “NO” by pressing [ ] and
press [ENTER].

5

Press the number buttons [0–9] to enter the password.

Note:
This temporary cancellation of rating level will
be kept until the disc is ejected.
When the disc is ejected, the original rating
level will be set again automatically.

4

6

A
B
C

OK

A
B
C

YES

NO

DVD

5

3, 4, 6

3

Please enter the
4-digit password

Enter/0-9/Cancel

Your disc exceeds
the parrental control level 1.

Parental Control Level
Cancel Picture

/Enter

• selected “YES”

• selected “NO”

?

Depending on the DVD disc, the disc may try
to temporarily cancel the rating level that you
have set.
It is up to you to decide whether to cancel the
rating level or not.

Press [ENTER].
Playback will commence if the entered password was
correct.

Place a DVD disc on the disc tray
and push the tray to close. (See
page E15.)

If you selected “YES”, press [ENTER] while “Parental

Control Level” is selected.

• If the 4-digits password at steps 4 ~ 6 on page E36 has

been set, the password entering screen will appear as
shown in step 5 below.
Alternatively, if the password has not been set,
playback will commence.

• If you don’t know (or have forgotten) the password,

select “Cancel Picture”.
The screen when “NO” is selected in step 3 will be
displayed. Remove the disc using [DISC OPEN] on the
unit.

TEMPORARY DISABLING OF RATING LEVEL BY DVD DISC

5D90401A P29-38

26/06/2003, 16:54

37

Advertising