Sony DAR-RH7000 - Manual (Page 59)

59
Ti
m
e
r Re
co
rd
in
g
Recording from connected
equipment without a timer
You can record from a connected VCR or similar
device. For connection details, see “Connecting a
VCR or similar device” on page 29.
1
Press HDD or DVD.
If you select DVD, insert a recordable DVD
(see “Inserting a disc” on page 36).
2
Press INPUT SELECT to select an input
source according to the connection you
made.
The front panel display changes as follows:
3
Select the line input audio when recording
a bilingual programme on the HDD or DVD-
RWs (VR mode).
Press TOOLS, select “Line Audio Input,” and
press ENTER. Then select “Bilingual,” and
press ENTER.
For details about bilingual recording, see
page 49.
4
Press REC MODE repeatedly to select a
recording mode.
For details about the recording mode, see
page 48.
5
Press X REC PAUSE to set this recorder to
record pause.
6
Insert the source tape into the connected
equipment and set to playback pause.
7
At the same time, press X REC PAUSE on
this recorder and the pause or play button
on the connected equipment.
Recording starts.
To stop recording, press x REC STOP on this
recorder.
z Hint
You can adjust the settings for the recording picture
before recording. See “Adjusting the recording picture
quality and size” on page 54.
Notes
• When recording a video game image, the screen may
not be clear.
• Any programme that contains a Copy-Never copy
guard signal cannot be recorded. The recorder
continues to record, but a blank screen will be recorded.
L2 L1 L3 L4
TV programme
position