Sony DAR-RH7000 - Manual (Page 89)

89
Ot
her
O
p
e
rat
io
ns
4
Release [/1.
When the TV/DVD switch is set to TV, the
remote performs the following:
* For two-digit numbers, if you use the number
buttons to select the TV’s programme position,
press -/-- followed by the number buttons.
To operate the t TV/DVD button
(for SCART connections only)
The t TV/DVD button switches between the
recorder and the last input source selected on the
TV. Point your remote at the recorder when using
this button. The button works even if the TV/DVD
switch is set to DVD.
When you connect the recorder to the TV via the
SCART jacks, the input source for the TV is set to
the recorder automatically when you start
playback. To watch another source, press the
t TV/DVD button to switch the TV’s input
source.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the one
that works with your TV.
Button Operation
[/1 Turns your TV on or off
2 (volume) +/– Adjusts the volume of
your TV
t TV/DVD Switches your TV’s
input source
PROG +/– Selects the programme
position on a Sony TV
Number buttons
and SET, -/--* Selects the programme
position on a Sony TV
(wide mode) Switch to or from the
wide mode of a Sony
wide-screen TV.
Manufacturer Code number
Sony 01 (default)
Grundig 04
Hitachi 06
Panasonic 05, 12
Philips 02, 03
Samsung 13
Sanyo 07
Sharp 08
Thomson 11
Toshiba 10
JVC 09
Manufacturer Code number