Sony BKP-7933 User Manual
Page 17
1-11 (E)
BKP-7933
12131415
1
1
12
33
33
44
44 45
45
56
56
57
57
58
68
1024
1024
ROUTER
PIX1
CAMERA-CCU
CCU-RCP
MSU2
MSU1
SOURCE No.
DESTINATION No.
LEVEL-1
ROUTER PIX3
ROUTER PIX2(MSU2)
ROUTER PIX2(MSU1)
Saving the Setup Data
Press [Ctrl] - [E] to validate and save the setup data and to return to the BKP-7933 menu display.
Press [Ctrl] - [D] to return to the BKP-7933 menu display without saving the setup data.
Level Mapping
The level of the routing system can be set in this system. Refer to the installation manual (for system
setup) that is supplied with the routing switcher system for an overview of level mapping.
Notes on Setting Up
. Perform the setup for the camera numbers that are actually connected. If setup is performed for camera
numbers that are not actually connected, the response speed of the routing switcher may be slowed and
the normal function may be hindered. Be sure to set 0 for the camera numbers that are not actually
connected.
. When setting up the MODIFICATION COMMAND and the MAINTENANCE COMMAND, do not
duplicate the SOURCE No. and the DESTINATION No. when their level settings are the same. If a
number is duplicated, the LEVEL No. is automatically set to 0 and the setup is invalidated. The
command assignments when shipped from the factory are shown below for reference.
1-7. Setting Up