Sony BKP-7933 - Manual (Page 30)

1-24 (E)
BKP-7933
SONY ROUTING SYSTEM SETUP MENU BKP-7933 V1.00 STATION NUMBER 2
MODIFICATION COMMAND
A: SET UNIT LOCATION(CAM-CCU) B: SET UNIT LOCATION(CCU-RCP)
C: SET UNIT LOCATION(MSU)
K: RESET TO DEFAULT TABLE
MAINTENANCE COMMAND
Z: BKP-7933 CONFIGURATION
Ctrl-D RETURN
SET UNIT LOCATION(CCU-RCP) BKP-7933 V1.00 STATION NUMBER 2
CCU-RCP MATRIX(Remote RCP ASSIGNMENT)
SOURCE No DESTINATION No LEVEL No
0045 -0056 0045-0056 1
Ctrl-E RETURN TO MENU
Setting from the S-BUS Primary Station
1. Select the menu item “B:SET UNIT LOCATION
(CCU-RCP)” and press [ENTER].
2. Move the cursor key to the desired position to be
changed and press [ENTER]
. (The display enters the
input mode.)
3. Input the SOURCE No., DESTINATION No. and
LEVEL No. using the numeric keys and press
[ENTER].
m
. Up to 96 in the range of 1 to 1024 can be selected
and set to the SOURCE No. and DESTINATION
No., but the numbers must be consecutive.
. Any number in the range of 1 to 8 can be set to the
LEVEL No. This setting can be assigned to the
respective level and can be mapped.
1-7. Setting Up