Sony BKP-7933 - Manual (Page 23)

1-17 (E)
BKP-7933
Setting from the S-BUS Primary Station
1. Select the menu item “Z:BKP-7933 CONFIGURA-
TION” and press [ENTER].
SONY ROUTING SYSTEM SETUP MENU BKP-7933 V1.00 STATION NUMBER 2
MODIFICATION COMMAND
A: SET UNIT LOCATION(CAM-CCU) B: SET UNIT LOCATION(CCU-RCP)
C: SET UNIT LOCATION(MSU)
K: RESET TO DEFAULT TABLE
MAINTENANCE COMMAND
Z: BKP-7933 CONFIGURATION
Ctrl-D RETURN
BKP-7933 CONFIGURATION BKP-7933 V1.00 STATION NUMBER 2
S-BUS CONFIGURATION
A: ROUTER PIX1 ASSIGN B: ROUTER WF1 ASSIGN
C: ROUTER PIX2 ASSIGN D: ROUTER WF2 ASSIGN
E: ROUTER PIX3 ASSIGN F: ROUTER WF3 ASSIGN
G: S-BUS TALLY H: BKP-7933 MODE
Ctrl-E RETURN TO MENU
BKP-7933 CONFIGURATION BKP-7933 V1.00 STATION NUMBER 2
ROUTER PIX2 ASSIGN (For MSUs Camera Select)
CNU GROUP No SOURCE No DESTINATION No LEVEL No
(Camera No.)
0 ( 1) 0001 0013 [FOR MSU 1] 1---
0 ( 2) 0002 0014 [FOR MSU 2]
0 ( 3) 0003 0000 [FOR MSU 3]
0 ( 4) 0004 0000 [FOR MSU 4]
0 ( 5) 0005 0000 [FOR MSU 5]
0 ( 6) 0006 0000 [FOR MSU 6]
0000 [FOR MSU 7]
1 ( 7) 0007 0000 [FOR MSU 8]
1 ( 8) 0008 0000 [FOR MSU 9]
1 ( 9) 0009 0000 [FOR MSU 10]
1 (10) 0010 0000 [FOR MSU 11]
1 (11) 0011 0000 [FOR MSU 12]
1 (12) 0012 0000 [FOR MSU 13]
0000 [FOR MSU 14]
0000 [FOR MSU 15]
0000 [FOR MSU 16]
F1:F2: F3:PgUp F4:PgDn Ctrl-E RETURN TO MENU
2. Select either “C:ROUTER PIX2 ASSIGN” or
“D:ROUTER WF2 ASSIGN” using the cursor key and
press [ENTER]. (The illustration shows the display
that selects “C:ROUTER PIX2 ASSIGN”. )
3. Move the cursor key to the desired position to be
changed and press [ENTER]. (The display enters the
input mode.)
4. Input the SOURCE No., DESTINATION No. and
LEVEL No. using the numeric keys and press
[ENTER]. (The illustration shows the display that
selects “C:ROUTER PIX2 ASSIGN”. )
m
. Any number in the range of 1 to 1024 can be
selected and set to the SOURCE No. and DESTINA-
TION No. without being consecutive.
. LEVEL No. can be freely set, but it cannot be set for
each camera number.
1-7. Setting Up