Sony CDX-C760 - Manual (Page 15)

15
EN
With Optional Equipment
CD/MD Changer
You can control up to 7 CD and MD changers
with this unit.
If you connect an optional CD changer with
the CD-TEXT function, the CD-TEXT
information will appear in the display when
you play back a CD-TEXT disc.
Playing a CD or MD
1
Press (SOURCE) repeatedly to select the
CD or MD.
2
Press (MODE) until the desired changer
appears.
CD/MD playback starts.
When a CD or MD changer is connected, all
the tracks play from the beginning.
Changing the displayed item
Each time you press (DSPL) during CD, CD-
TEXT disc or MD playback, the item changes
as follows:
$
Elapsed playback time
$
Disc name* 1 /Artist name* 2
$
Track name* 3
$
Clock
* 1 If you have not labeled the disc or there is no disc name
prerecorded on the MD, “NO D.Name” appears in the
display.
* 2 If you play a CD-TEXT disc, the artist name appears in
the display after the disc name. (Only for CD-TEXT
discs with the artist name)
* 3 If the track name of a CD-TEXT disc or MD is not
prerecorded, “NO T.Name” appears in the display.
You can label a personalized name for CDs
and CD-TEXT discs with the disc memo
function, refer to “Labeling a CD” (page 19).
Tip
If the name of the MD or CD-TEXT disc is too long, you
can scroll it across the display by pressing (SHIFT), then
(1) (N).
Automatically scrolling a disc name
— Auto Scroll
If the disc name/artist name or track name on
a CD-TEXT disc or MD exceeds 10 characters
and the Auto Scroll function is on,
automatically scrolls on the display as follows:
• The disc name appears when the disc has changed (if the
disc name is selected).
• The track name appears when the track has changed (if
the track name is selected).
• The disc or track name appears depending on the setting
when you press (SOURCE) to select an MD or CD-
TEXT disc.
If you press (DSPL) to change the display
item, the disc or track name of the MD or CD-
TEXT disc is scrolled automatically whether
you set the function on or off.
1
During playback, press (SHIFT).
2
Press (2) (SET UP) repeatedly until
“A.Scrl” appears.
3
Press (4) (n) to select “A.Scrl on.”
4
Press (SHIFT).
To cancel Auto Scroll, select “A.Scrl off” in
step 2 above.
Note
For some CD-TEXT discs with extremely many characters,
the following cases may happen:
— Some of the characters are not displayed.
— Auto Scroll does not work.
Displaying the recording date of
the current MD
Press (DSPL) for two seconds during MD
playback.
The recording date of the track is displayed
for about three seconds.
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press either side of
(SEEK/AMS) once for each track you
want to skip.
To locate succeeding tracks
To locate preceding tracks
Other Functions/CD/MD Changer