Sony CDX-C760 - Manual (Page 26)

26
EN
4
Press (SHIFT).
Notes
• The unit does not store TV channels with weak signals.
If only a few TV channels are received, some number
buttons will remain empty.
• When a preset number is indicated in the display, the
unit starts storing TV channels from the one currently
displayed.
Memorizing only the
desired TV channels
You can store up to 10 channels on the number
buttons in the order of your choice.
1
Press (SOURCE) repeatedly until “TV”
appears.
2
Press either side of (SEEK/AMS) to tune
in the TV program you want to store on
the number button.
3
Keep the desired number button ((1) to
(10)) pressed for two seconds until you
hear a beep tone.
The number button indication appears in
the display.
Note
If you try to store another program on the same number
button, the previously stored program will be erased.
TV/Video
With the optional TV tuner and TV
monitor connected
Watching the TV
1
Press (SOURCE) repeatedly until “TV”
appears.
2
Press either side of (SEEK/AMS) to select
the desired TV band.
Watching a video
1
Press (SOURCE) repeatedly until
“TV” appears.
2
Press (MODE) repeatedly to select
“Video 1.”
Play back the video.
Note
“Video 2” appears if the VIDEO 2 terminal of the TV
monitor is selected.
Memorizing TV channels
automatically
The unit selects the TV channels with the
strongest signals and memorizes them in the
order of their frequency.
Caution
When tuning in a station while driving, use
Best Tuning Memory to prevent accidents.
1
Press (SOURCE) repeatedly until “TV”
appears.
2
Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until “Auto mem”
appears.
3
Press (4) (n).
The unit stores TV channels in the order of
their frequencies on the number buttons.
A beep sound and the setting is stored.