Sony CDX-C760 - Manual (Page 20)

20
EN
Locating a disc by name
— List-up (CD changer with the custom file
function or MD changer)
You can use this function for discs that have
been assigned a custom name. For more
information on disc names, refer to “Labeling a
CD” (page 19).
1
Press (LIST) momentarily.
The name assigned to the current disc
appears in the display.
If you add disc memo labels to a CD-TEXT
disc, the display setting you make will
determine which information is displayed.
If the disc has only one set of information
(either CD-TEXT or disc memo labels), that
information will be displayed regardless of
the display setting you make.
2
Press (LIST) repeatedly until you find the
desired disc.
3
Press (5) (ENTER) to play back the disc.
Notes
• After a disc name has been displayed for five seconds, the
display goes back to normal playback mode. To turn off
the display, press (DSPL).
• The track names are not displayed during MD playback.
• If there are no discs in the magazine, “NO Disc”
appears in the display.
• If a disc has not been assigned a custom file, “********”
appears in the display.
• If the disc information has not been read by the unit, “?”
appears in the display. To load the disc, first press the
number button, then choose the disc that has not been
loaded.
• The information appears only in upper case. There are
also some letters which cannot be displayed (during MD
playback).
ENTER
EQ SUR
DISC
L S T
1 SCHUBERT
The display item will change depending on the setting
as follows:
A: CD-TEXT disc with disc memo
B: Normal CD with disc memo
C: CD-TEXT disc without disc memo
D: Normal CD without disc memo
* 2 If you connect an optional CD changer with the
CD-TEXT function, the CD-TEXT information
will appear in the display when you playback a CD-
TEXT disc.
Erasing the disc memo
1
Press (SOURCE) repeatedly to select CD.
2
Press (MODE) repeatedly to select the CD
changer.
3
Press (LIST) for two seconds.
4
Press (DSPL) for two seconds.
5
Rotate the dial to select the name you
want to erase.
6
Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (LIST) for two seconds.
The unit returns to normal CD playback
mode.
Type of
disc
A
B
C
D
Priority display
setting
Disc MEMO
TEXT name
Disc MEMO
TEXT name
Disc MEMO
TEXT name
Disc MEMO
TEXT name
Actual display
Disc memo
CD-TEXT information
Disc memo
CD-TEXT information
NO D.Name