Sony ShowView SLV-SE510B - Manual (Page 20)

20 Setting up the VCR with the Auto Set Up function
Master Page : Left
filename[010get.fm] model name1[SLV-SE510B] [3-065-671-E1 (1) GB]
Step 5 : Setting up the VCR with the Auto
Set Up function
Before using the VCR for the first time, set up the VCR using the Auto Set
Up function. With this function, you can set the TV channels, guide
channels for the ShowView system, and VCR clock automatically.
To cancel the Auto Set Up function
Press REGLAGE AUTO.
Notes
• Do not cancel the Auto Set Up function. If you do, repeat the steps above.
• The Auto Set Up function may require a long time to complete (approximately 15
to 18 minutes).
• Whenever you operate the Auto Set Up function, some of the settings (ShowView,
timer, etc.) will be reset. If this happens, you have to set them again.
Hold down REGLAGE AUTO on the VCR for more than three seconds.
The VCR automatically turns on, starts searching for all of the
receivable channels, and presets them in the appropriate order for
your local area (according to the TV system you selected in “Tuning
your TV to the VCR”).
If you want to change the order of the channels or disable unwanted
programme positions, see “Changing/disabling programme
positions” on page 27.
If you use the SMARTLINK connection, the Preset Download
function starts and the SMARTLINK indicator flashes in the display
window during download.
After the search or download is complete, the current time appears
in the display window for any stations that transmit a time signal. If
the time does not appear, set the clock manually. See page 32.
REGLAGE AUTO
REGLAGE AUTO
REGL CANAL