Sony ShowView SLV-SE510B - Manual (Page 51)

51 Recording TV programmes using the ShowView system
Bas
ic
O
pe
ration
s
Master Page : Right
filename[010bas.fm] model name1[SLV-SE510B] [3-065-671-E1 (1) GB]
To stop recording
To stop the VCR while recording, press x STOP.
3 Press OK.
The date, start and stop times,
programme position or station name,
tape speed, and VPS/PDC setting
appear on the TV screen.
If “– –” appears in the “PROG.”
(programme) column (this may
happen for local broadcasts), you
have to set the appropriate programme position manually.
Press
M/m to select the desired programme position.
To record from a decoder or other source connected to the LIGNE-1
(TV) or ENTREE LIGNE-2 connector, press CHOIX ENTREE to
display “L1” or ”L2” in the “PROG.” position.
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
If the information is incorrect, press ANNUL/0 to cancel the setting.
4 If you want to change the date, tape
speed, and the VPS/PDC setting:
1 Press </, to highlight the item
you want to change.
2 Press M/m to reset it.
• To record the same programme
every day or the same day every
week, see “Daily/weekly
recording” on page 52.
• To use the VPS/PDC function, set VPS/PDC to OUI.
For details about the VPS/PDC function, see “Timer recording
with VPS/PDC signals” on page 52.
5 Press MENU to exit the menu.
6 Press ?/1 to turn off the VCR.
The indicator appears in the display window and the VCR stands
by for recording.
To record from a decoder or other source, leave the connected
equipment switched on.
ANNUL/0
OK
LECTURE
CHOIX
ENTREE
5 1 9 : 0 0 2 0 : 0 0 3
DATE
ANNULER
REGLER
:
:
SELECTIONNER :
ANNUL / 0
MENU SORTIE :
MINUTERIE
SP / LP
LISTE
HEURE PROG.
SP VPS / PDC NON
VEN 2 8 . 9
AUJOURD.
OK
LECTURE DATE
ANNULER
REGLER :
SELECTIONNER :
MENU SORTIE :
SP / LP
LISTE
HEURE PROG.
SP VPS / PDC OUI
VEN 2 8 . 9
5 1 9 : 0 0 2 0 : 0 0 3 AUJOURD.
:
MINUTERIE
ANNUL / 0
MENU
continued