Star Micronics DOT MATRIX PRINTER SP2000 - Manual (Page 19)

17
1-2-2. Ptint Position Control
FUNCTION Line feed
CODE <LF>
(0A)H
OUTLINE Data in the line buffer is printed out and one line is fed. If data
does not exist before this code is received, the printer only feeds
one line.
FUNCTION Vertical tab
CODE <VT>
(0B)H
OUTLINE Feeds the paper to the next vertical tab set position.
When a vertical tab is not set, line feed is not performed. If the
current line is at or below the last vertical tab set position, the
paper feeds to the top of the next page.
FUNCTION Form feed
CODE <FF>
(0C)H
OUTLINE Inputting this code executes a page feed, on SP2320/2360 series
printers, after printing the data in the line buffer. On SP2520/
2560 series printers this code performs the following according to
the settings of the memory switches 0-2 and 0-3.
MSW 0-3 MSW 0-2
<FF> Command Function
SP2520/2560
0 0 Executes page feed
0 1 Executes full cut (*1) after feeding
paper to the cutting position.
1 0 Executes page feed
1 1 Executes partial cut (*1) after feeding
paper to the cutting position.
*1: Paper feed to the cutting position is executed in inches.