Star Micronics DOT MATRIX PRINTER SP2000 - Manual (Page 3)

1
1-1. Control Codes List
The following tables show the Star Mode commands that are supported by
this printer.
1-1-1. Character Selection
Control Hexadecimal Function Page
Codes Codes
<ESC> "R" n 1B 52 n Selects the international character set 7
<ESC> "/" "1" 1B 2F 31
Selects slash zero
7
<ESC> "/" <1> 1B 2F 01
<ESC> "/" "0" 1B 2F 30
Selects normal zero 7
<ESC> "/" <0> 1B 2F 00
<ESC> <GS> "t" n 1B 1D 74 n Selects the character code table 8
<ESC> "6" 1B 36 Selects character set #2 10
<ESC> "7" 1B 37 Selects character set #1 10
<ESC> "M" 1B 4D Selects the 7 X 9 (half dot) font (Default) 10
<ESC> "P" 1B 50 Selects the 5 X 9 (2 pulses per dot) font 11
<ESC> ":" 1B 3A Selects the 5 X 9 (3 pulses per dot) font 11
<ESC> <SP> n 1B 20 n Sets character spacing 11
<SO> 0E Sets the printing magnified double in
12
character width
<DC4> 14 Resets the printing magnified in
12
character width (Default)
1. Control Codes (Star Mode)