Star Micronics DOT MATRIX PRINTER SP2000 - Manual (Page 36)

34
FUNCTION Partial-cut command to the auto cutter after paper feed
CODE <ESC> “d” “3” or <ESC> “d” <3>
(1B)H (64)H (33)H or (1B)H (64)H (03)H
OUTLINE Paper feed + full cut command
Executes the following actions after printing the data in the line
buffer.
(SP2520/2560) Feeds paper to the cutting position and executes
a full cut (Note 1).
(SP2320/2360) Feeds paper to the tear bar position (Note 2).
Note 1: Paper feed to cut position: Executed in 1 inch units.
Note 2: Paper feed to tear bar position: Executed in 7/6 inch
units.