Sony XDCAM HD PDW-HD1500 - Manual (Page 147)

147
Correspondence Between Setting Items of HKDV-900 and Setup Menu of This Unit
Ap
pend
ix
Correspondence
Between Setting Items of
HKDV-900 and Setup
Menu of This Unit
a) The setting becomes effective for the output only when VID. PROC on
page P1 VIDEO of the function menu is set to “MENU”.
b) Whether to set the down-converter or up-converter is determined using
setup menu item 212 VIDEO REMOTE CONTROL SELECT. If both
converters are selected (“u & d” of menu item 212), the relevant menu item
allows both converters to be set, but only the value for the down-converter
is used as the return value from this unit and the unity value.
Meaning of abbreviations within parentheses in
the table
HD: HDSDI output during playback of HD format video
DC: Down-conversion output to SD (D1 SDI/
COMPOSITE) during playback of HD format video
SD: SD (D1 SDI/COMPOSITE) output during playback
of SD format video
UC: Up-conversion output to HDSDI during playback of
SD format video
Setting item of
HKDV-900 Menu item of this unit's setup
menu
HD Master 740: MASTER LEVEL (HD) a)
HD Y
741: Y LEVEL (HD)
a)
HD Pb
742: Pb LEVEL (HD)
a)
HD Pr 743: Pr LEVEL (HD) a)
HD Setup
745: SETUP LEVEL (HD)
a)
HD Sync Phase
746: SYNC PHASE (HD/UC)
a)
HD Fine
747: FINE (HD/UC)
a)
D1 Master No menu item corresponds to this setting
item.
D1 Y No menu item corresponds to this setting
item.
D1 B-Y No menu item corresponds to this setting
item.
D1 R-Y No menu item corresponds to this setting
item.
D2 VIDEO 715: VIDEO GAIN CONTROL (HD/DC/
SD/UC)
a)
D2 CHROMA 716: CHROMA GAIN CONTROL (HD/
DC/SD/UC)
a)
D2 HUE 717: CHROMA PHASE CONTROL (HD/
DC/SD/UC)
a)
SETUP 718: SETUP LEVEL/BLACK LEVEL (HD/
DC/SD/UC)
a)
SD Sync Phase 719: SYSTEM PHASE SYNC (DC/SD)
SD Fine 720: SYSTEM PHASE SC (DC/SD)
CROSS COLOR 934: CROSS COLOR (DC)
H CROP
POSITION 932: H CROP POSITION (DC)/
951: H CROP POSITION (UC)
b)
DETAIL GAIN 935: DETAIL GAIN (DC)/
954: DETAIL GAIN (UC)
b)
LIMITTER
936: LIMITER (DC)/955: LIMITER (UC)
b)
CRISP 937: CRISP THRESHOLD (DC)/
956: CRISP THRESHOLD (UC)
b)
DEPEND 938: LEVEL DEPEND THRESHOLD
(DC)/
957: LEVEL DEPEND THRESHOLD
(UC)
b)
FREQUENCY 939: H DETAIL FREQUENCY (DC)/
958: H DETAIL FREQUENCY (UC)
b)
H/V RATIO 940: H/V RATIO (DC)/
959: H/V RATIO (UC)
b)
GAMMA No menu item corresponds to this setting
item.
CROP 930: DOWN CONVERTER MODE/
950: UP CONVERTER MODE
b)
LETTER BOX 930: DOWN CONVERTER MODE/
950: UP CONVERTER MODE
b)
SQUEEZE 930: DOWN CONVERTER MODE/
950: UP CONVERTER MODE
b)
Setting item of
HKDV-900 Menu item of this unit's setup
menu