Sharp OZ-5500 - Manual (Page 47)

1
45
Setting up the Organizer after Initialization
The Organizer takes you through the various steps needed
to set up the Organizer before use. These steps are
described below. We strongly recommend that you
complete the entire SET UP procedure before starting to
actually use your Organizer.
* Welcome messages and instructions
* Setting the Owner Information
* Setting the Clock
* User’s Preferences
Welcome messages and instructions
After completing the LCD Contrast setting above, the
Organizer displays the following welcome message, briefly
outlining its functions.
#1-6 Display
Press ENTER to proceed with the User Setup.
The User Setup introduction appears to explain the
operations you are about to carry out.
Press ENTER to continue.
The User Setup Basic Instructions appear to instruct you
how to move around the screen during User Setup and
normal use.
You can use ˜ ¶ ' § to move around the
screen. You can also use PREV and NEXT to move from
field to field.
Press ENTER to proceed with setting the Owner
Information (or CANCEL to exit the SETUP procedure).
Setting the Owner’s Information
The Owner Information comprises your name, address and
telephone number. You can choose to have this information
displayed each time you turn the Organizer on.
☞
If you make a mistake while entering the Owner
Information, don’t worry! You can amend the Owner
Information easily during normal use, so just proceed
with the rest of the User Setup. (see PREFERENCES,
p.185)
1. After pressing ENTER after the previous Basic
Instructions screen, the Set Owner Information screen
appears.
#1-7 Display
2. Enter your name, then press NEXT .
The cursor moves to the TEL NO. field.