Sharp OZ-5500 User Manual
Page 48
46
3.
Enter your telephone number, then press
NEXT
.
The cursor moves to the ADDRESS field.
4.
Enter your full address.
Press
➞
to move the start of the next line in
ADDRESS.
5.
Press
ENTER
when done.
A message appears confirming the Owner Information has
now been set.
Press
ENTER
to proceed with setting up the Clock as
described below (or
CANCEL
to quit the User Setup
procedure).
Setting the Clock
In order for the Calendar, Schedule, To Do, and other
time-based applications to work correctly, the built-in clock
must be set to the correct time, date and city. The Clock
application displays the time in two different cities: the
Local city, where the user normally lives or works, and the
World city, which is any other city of the user’s choice.
When the Organizer is first initialized, the Local city is
automatically set to New York, and the World city is
London. Before setting the Clock’s correct time, you should
first select the Local City for which you want to set the time.
After entering the Owner Information above, the following
list of cities appears:
#1-8 Display
6.
If the desired city does not appear, press
PREV
or
NEXT
to display more cities.
You can jump to a particular country by pressing the
first letter of that country’s name.
7.
Select the desired city by moving the cursor to it.
☞
If your city does not appear in the list, press
SPACE
to display the User Cities list, then select USER
CITY2. You can change the name to your city later,
using the Clock application menu.
8.
Press
ENTER
.
The Daylight Saving Time screen appears.
9.
If your city is currently on Daylight Saving Time, press
Y
, otherwise press
N
.
The ADJUST TIME/DATE window then appears.
10.
Enter the local time, preceding single-digit hours and
minutes with “0”.
11.
Press
PM
to select PM or
AM
for AM, then press
NEXT
.
12.
Select the time system you want the Clock to use,
then press
NEXT
.