Sony XDCAM PDW-1500 - Manual (Page 104)

C
h
a
p
te
r 8
M
e
nu
s
104
8-3 Extended Menu
602 VITC POSITION SEL-2
Select a line into which to insert VITC signals for IMX recording signals
a)
and DVCAM playback signals. b)
12 H (12 line)... 18 H (18 line)... 20 H (20 line) (in 525(U)/525(J) line
modes)
9 H (9 line)... 21 H (21 line)... 22 H (22 line) (in 625 line mode)
Note
You can insert the VITC signal in two places. To insert it in two places, set
both items 601 and 602.
a) In the IMX format, VITC is inserted as video signals in vertical blanking sections.
Because these signals are output as video signals during playback, the insertion
line can be specified only for recording.
b) In the DVCAM format, VITC is recorded as VAUX (Video Auxiliary) data.
Because VITC is inserted into video signals by the VITC generator only during
playback, the insertion line can be specified only for playback.
605 TCG REGEN MODE Select the signal to be regenerated when the time code generator is in
the regeneration mode (i.e., when “int regen,” “ext regen” or “rp188
regen” is selected in menu item 626).
TC&UB: Both the time code and user bits are regenerated.
TC: Only the time code is regenerated.
UB: Only the user bits are regenerated.
607 U-BIT BINARY GROUP FLAG Select the user bits to be used in the time code generated by the time
code generator.
000 (000:not specified): Character set not specified.
001 (001:iso character): 8-bit characters compliant with ISO 646 and
ISO 2022.
010 (010:unassigned-1): Undefined.
011 (011:unassigned-2): Undefined.
100 (100:unassigned-3): Undefined.
101 (101:page / line): SMPTE 262M page/line multiplex system.
110 (110:unassigned-4): Undefined.
111 (111:unassigned-5): Undefined.
611 TC OUTPUT PHASE IN EE MODE Select the time code output mode for output from the TIME CODE OUT
connector in E-E mode.
mutng (muting): Suppress the output.
thru (through): Output the time code input to the TIME CODE IN
connector as it is.
v-in (video input phase): Output the time code with the same phase as
the input video signal phase.
v-out (video output phase): Output the time code with the same phase
as the output video signal phase.
612 TC OUTPUT MUTING IN SEARCH
MODE Select whether to suppress the output from the TIME CODE OUT
connector in jog/shuttle mode.
on: Suppress.
off: Do not suppress.
619 VITC Specify whether or not to record the VITC generated by the internal time
code generator.
off: Do not record internally generated VITC.
on: Record internally generated VITC.
Note
Even if this item is set to “off,” VITC is recorded if the input video signal
contains VITC and the VITC line is set to “thru” with item 723.
Menu items in the 600s, relating to the time code, metadata, and UMID
Item number Item name Settings