Sony XDCAM PDW-1500 - Manual (Page 106)

C
h
a
p
te
r 8
M
e
nu
s
106
8-3 Extended Menu
Menu items in the 700s, relating to video control
Item number Item name Settings
701 SELECTION OF VIDEO/SYNC
DELAY An E-E video signal is output delayed with respect to the video input
signal by the time for video circuit processing.
With this item, select whether or not to delay the sync signal attached to
the output video signal by an amount corresponding to the video signal
delay.
sync (sync delay): Delay the sync signal by the corresponding amount
before attaching it.
video (video delay): Attach a sync signal with the same timing as the
input signal.
703 BLANK LINE SELECT Switch blanking of the video output signal on or off for individual lines in
the vertical blanking interval.
Sub-item The Y/C signal and odd/even fields are blanked simultaneously.
1 ALL LINE - - -: Specify the blanking for each line separately.
blnk (blank): Regardless of the setting of other sub-items, blank all lines
which can be specified in this menu item.
thru (throu): Regardless of the setting of other sub-items, switch off
blanking for all lines which can be specified in this menu item.
2 ... 9 LINE 12 ...
LINE 19 In 525(U)
line mode Specify blanking for lines 12 to 19.
blnk (blank): Carry out blanking.
thru (throu): Switch off blanking.
10 LINE 20 Specify blanking for line 20.
blnk (blank): Carry out blanking.
half: Carry out half-blanking.
thru (throu): Switch off blanking.
2 ... 10 LINE 12 ...
LINE 20 In 525(J)
line mode Specify blanking for lines 12 to 20.
blnk (blank): Carry out blanking.
thru (throu): Switch off blanking.
11 LINE 21 Specify blanking for line 21.
blnk (blank): Carry out blanking.
half: Carry out half-blanking.
thru (throu): Switch off blanking.
2 ... 15 LINE 9, 322 ...
LINE 22, 335 In 625 line
mode Specify blanking for lines 9, 322 to 22, 335.
blnk (blank): Carry out blanking.
thru (throu): Switch off blanking.
16 LINE 23 Specify blanking for line 23.
half: Carry out half-blanking.
thru (throu): Switch off blanking.
705 EDGE SUBCARRIER REDUCER
MODE Select whether to enable the edge subcarrier reducer (ESR).
on: Enable.
off: Do not enable.
When playing back a composite signal, set this to “on.”
707 FORCED VERTICAL
INTERPOLATION OFF The “Y-add” function is normally switched on automatically during jog or
variable speed playback. This item selects whether or not to force the “Y-
add” function off.
auto: Automatically switch the “Y-add” function on.
off (forced YADD off): Force the “Y-add” function off.
The “Y-add” function is off while a disc image is displayed in stop mode
(menu item 108 “AUTO EE SELECT” is “off”).
The “Y-add” function is a circuit operation to interpolate the video signal
vertically during jog or variable speed playback for the purpose of
reducing the vertical movement of the playback picture.