Sharp AR-C260 - Manual (Page 85)

NORMAL COPYING
5-9
5
Automatic two-sided copying from the document glass
When a duplex module/2 x 500 sheet paper drawer and a duplex bypass/inverter unit are installed, the following
automatic two-sided copy function is possible. The copy paper is turned over automatically, allowing easy two-sided
copying.
1 Place an original on the document glass.
(page 4-6)
2 Touch the [2-SIDED COPY] key.
3 Touch the [1-sided to 2-sided copy] key.
When making automatic two-sided copies of a
one-sided 11" x 17" (A3) or 8-1/2" x 14" (B4) size
portrait original, or when the front and back side of
a two-sided original are copied backwards, touch
the [BINDING CHANGE] key.
4 Touch the [OK] key.
Make selections and proceed as in steps 3 to 7 on
pages 5-7 and 5-8.
NOTE
Certain restrictions exist depending on the amount of memory installed and the copy settings. (See "Copy mode
output restrictions" and "Specifications for memory capacity and maximum number of originals" on page 5-4.).
Original Copy
2-SIDED COPY
OUTPUT
Example of a
portrait-oriented
original Example of a
landscape-oriented
original
BINDING
CHANGE
OK
00-08.book 9 ページ ２００２年１１月８日 金曜日 午前９時３９分