Sharp AR-C260 - Manual (Page 84)

NORMAL COPYING
5-8
4 Select the desired output mode. (See page
5-5.)
When a document is
detected on the
document glass, the
group mode will be
automatically selected.
To select sort copy,
touch the [OUTPUT]
key, then touch the
[SORT] key on the displayed screen, and then
touch the [OK] key.
5 Use the numeric keys to set the desired
number of copies.
Up to 999 can be set.
If you are only making a
single copy, the copy
can be made with the
copy number display
showing "0".
Use the [C] (clear) key to
cancel an entry if a
mistake has been made.
6 Press the [COLOR COPY START ( )]
or [BLACK COPY START ( )] key.
Replace the original with
the next original and
press the [START] key.
Repeat this operation
until all originals have
been scanned.
7 Touch the [READ-END] key.
If you selected "Sort" for
the output in step 4 and
pressed the [BLACK
COPY START] key in
step 6, it is necessary to
touch the [READ-END]
key.
NOTE
If the [SORT] or [GROUP] key is touched, its
corresponding icon will appear on the touch panel.
To clear the icon display, press the [CA] (clear all)
key. Note that all selections made to that point will be
canceled.
NOTE
If color copies are made with the output set to "Sort",
only one set of copies will be made even if a
selection is made for a greater number of copies.
(See page 5-5 "Copy output (sort and group)") When
"Group" is selected, the selected number of copies
will be made (See page 5-4 "Copy mode output
restrictions").
2-SIDED COPY
OUTPUT
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
00-08.book 8 ページ ２００２年１１月８日 金曜日 午前９時３９分