Sharp AR-C260 - Manual (Page 93)

5-17
5
SPECIAL PAPERS
Special papers including transparency film, postcards and envelopes must be fed through the bypass tray.
1 Place the original in the document feeder
tray (when a reversing automatic
document feeder is installed) or on the
document glass. (page 4-6)
2 Load the special paper in the bypass tray.
See pages 2-6 and 2-9
for the specifications of
paper that can be used
in the bypass tray.
For the paper loading
instructions see
"Loading paper in the
bypass tray" (page 2-4)
3 Touch the [PAPER SELECT] key and then
select the bypass tray.
Select the type of paper
that you inserted in the
bypass tray.
4 Make all other desired settings such as
exposure or the number of copies, and
press the [COLOR COPY START (
)]
or [BLACK COPY START ( )] key.
When copying from the
document glass in the
sort mode using the
[BLACK COPY START
(
)] key, touch the
[READ-END] key after
all originals have been
scanned. (step 7 on
page 5-8)
AUTO
EXPOSURE
AUTO 8½x11
PAPER SELECT
100 %
COPY RATIO
AIN
AL
½x8½
8½x11
NOTES
● Output location for copies on heavy paper 2,
transparencies, and envelopes
Copies on these types of paper will be output face-
up to the tray on the left side of the machine.
They cannot be delivered to the center tray. Face-
down delivery is not possible for these papers.
● ● ● ● Color adjustment menu
As special functions of color copying, the following
color image adjustments are available. (Page 6-
11)
● RGB ADJUST
● SHARPNESS
● SUPPRESS BACKGROUND
● COLOR BALANCE
● BRIGHTNESS
● INTENSITY
sec_whale_05-2.fm 17 ページ ２００２年１２月２日 月曜日 午後３時３５分