Sony STR-DA4ES - Manual (Page 30)

30 GB
n A1˜A2˜...˜A0˜B1˜B2˜...˜B0N
n C0˜...C2˜C1N
Presetting radio stations
You can preset up to 30 FM or AM stations.
Then you can easily tune in the stations you
often listen to.
Presetting radio stations
1
Rotate FUNCTION to switch the
function to TUNER.
2
Tune in the station that you want to
preset using Automatic Tuning (page
28) or Direct Tuning (page 29).
3
Press MEMORY.
“MEMORY” appears in the display for a
few seconds. Do steps 4 to 5 before the
display goes out.
4
Press PRESET TUNING + or – to select
a preset number.
If “MEMORY” goes out before you select
the preset number, start again from step 3.
5
Press MEMORY again.
The station is stored to the selected preset
number.
If “MEMORY” goes out before you press
MEMORY, start again from step 3.
6
Repeat steps 2 to 5 to preset another
station.
Tuning to preset stations
Using the receiver
1 Rotate FUNCTION to switch the function to
TUNER.
The last received station is tuned in.
2 Press PRESET TUNING + or – repeatedly
to select the preset station you want.
Each time you press the button, you can
select the preset station as follows:
Using the remote
STR-DA7ES
Use the supplied remote RM-TP1.
1 Touch RM SELECT.
The RM SELECT screen appears.
2 Touch AMP.
The screen for operiting the receiver appears.
3 Touch TUNER.
The receiver swiches to the TUNER input.
4 Touch B to return to the RM SELECT
screen.
5 Touch TUNER in the RM SELECT screen.
6 Touch SHIFT repeatedly to select A, B or
C.
7 Touch PRESET +/– repeatedly to select
the preset station you want.
You can also select the preset stations
directly. Do the following after step 5
(above).
1 Touch b to the display screen 2/3.
2 Touch A, B, or C.
3 Touch the numeric buttons to enter the preset
number.
STR-DA4ES
Use the supplied remote RM-LP211.
1 Select “TUNER” from the FUNCTION list to
switch the function to TUNER.
2 Move the easy scroll key to select the
preset number you want, then press the
key to enter the selection.