Sony STR-DA4ES - Manual (Page 57)

Advanced adjustments and settings
57 GB
Custom install mode
This receiver features the custom install modes
described below. Depending on how you intend
to use these features, use of these modes may
require additional equipment (available
separately) or modification of your listening
environment. Please consult the retailer where
you purchased this receiver for more
information.
INSTALLER mode
• ON
The receiver can receive commands from the
RS232 port even when the power is off
(standby mode).
• OFF
The receiver does not receive commands from
the RS232 port when the power is off (standby
mode).
12V TRIG mode
Lets you control external equipment by
outputting 12V triggers (STR-DA7ES: 3
outputs, STR-DA4ES: 2 outputs) in
conjunction with the receiver's function
operations. For example, you can automatically
unroll your video screen when you select DVD/
CD.
x 12V TRIG.MAIN
(12 V trigger for the main room)
Controls the main room 12V trigger output.
• ON
Lets you turn on output of 12V triggers for the main
room.
• OFF
Lets you turn off output of 12V triggers for the
main room.
• FUNC
Lets you select which functions will output the 12V
triggers for the main room.
Initial settings when 12V. TRIG MAIN is set to
ON:
VIDEO 1, VIDEO 2, VIDEO 3, DVD/LD, TV/
SAT, TAPE, MD/DAT, CD/SACD, TUNER,
PHONO
To select the functions which will output
the 12V triggers
1 Press ENTER while “12V. TRIG MAIN
[FUNC]” is displayed.
2 Press the cursor buttons ( or ) to select a
function.
3 Turn the jog dial to turn the 12V trigger ON/OFF.
4 Repeat steps 2 and 3 to make all necessary
changes.
5 Press ENTER when you have finished.
x 12V TRIG.2ND
(12 V trigger for the 2nd room)
Controls the 2nd room 12V trigger output.
• ON
Lets you turn on output of 12V triggers for the 2nd
room.
• OFF
Lets you turn off output of 12V triggers for the 2nd
room.
• MAIN
Lets you link 2nd room trigger operation to the
main room.
x 12V TRIG.3RD
(12 V trigger for the 3rd room)
(STR-DA7ES only)
Controls the 3rd room 12V trigger output.
• ON
Lets you turn on output of 12V triggers for the 3rd
room.
• OFF
Lets you turn off output of 12V triggers for the 3rd
room.
• MAIN
Lets you link 3rd room trigger operation to the main
room.