Speaking to the subscribers individually, Ending the conference call – Siemens 3035isdn User Manual
Page 37
64
Press the keys in the
specified order
Telephoning with multiple subscribers
17.5.00
Mehrere.fm
Gigaset3035isdn
A31008-G3035-B101-6-7619
Korrektur: 0
Speaking to the subscribers individually
You have set up a three-party conference and now wish to
speak to the subscribers individually:
,1',9
This switches to the subscriber with whom you were orig-
inally connected before the three-party conference was ini-
tiated.
<
or
;
To switch between the subscribers (toggling).
!(;,7
Select a subscriber to end the call.
Ending the conference call
0 If you have initiated a three-party conference: replace the
handset. This ends all connections. The other parties will
hear the busy tone.
If one of the other parties hangs up, you will remain con-
nected to the third party.
©
Handset:
Press
{
}
during an internal call and
select the call number of the external subscriber.
The subscriber answers.
To set up a three-party conference:
press
z
and
4
.
©
Handset:
Disconnect three-party conference:
In external and internal calls the call is switched
to the first subscriber, i.e. the one with whom you
were originally connected before the three-party
conference was initiated.
Press
z
and
4
.