Siemens 3035isdn - Manual (Page 40)

68
Press the keys in the
specified order
Individual telephone settings
17.5.00 Ind_einr.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Display contrast
 Call the menu.
< 6HWWLQJV =
< 7HOVHWWLQJVÖÖ = Select and confirm.
< Ö&RQWUDVWÖ = Select and confirm.
Contrast = Select and confirm.
#
and
$
The phone is in standby.
Enabling room monitoring/intercom
This setting must first be enabled if you want to use your
base station telephone as an intercom or for monitoring
the area around the base station telephone.
 Call the menu.
< 6HWWLQJV =
< 7HOVHWWLQJVÖÖ = Select and confirm.
< 5RRP0,QWHUF If the display is highlighted, then the room monitoring and
intercom features are enabled.
To switch the setting:
= Activate/deactivate.
#
and
$
The phone is in standby.
Activating/deactivating tones
You can activate or deactivate the following tones:
● key beep,
● confirmation tone,
● error tone.
 Call the menu.
< 6HWWLQJVÖ = Select and confirm.
$XGLRÖÖÖÖÖÖÖÖÖÖÖ =
< 7RQHV = Select and confirm.
< Required tone If the relevant display is highlighted, the tone is active.
= Activate/deactivate.
# and $ The phone is in standby.
69
Press the keys in the
specified order
Individual telephone settings
17.5.00 Ind_einr.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Setting the ringer melody (internal)
Different ringer melodies can be used on the base station
telephone to distinguish between internal and external
calls. The melody you set only applies to internal calls.
The base station telephone offers 10 different ringer melo-
dies.
 Call the menu.
< 6HWWLQJVÖ = Select and confirm.
$XGLRÖÖÖÖÖÖÖÖÖÖÖ =
< 5LQJHU0HORG\  = Select and confirm.
Ringer melody = Select and confirm the required ringer melody.
#
and
$
The phone is in standby.
Setting the ringer volume
The base station telephone has 5 volumes and a “Cre-
scendo” ring. The “Crescendo” ring means that the ringer
on the base station telephone starts quietly and gets pro-
gressively louder.
 Call the menu.
< 6HWWLQJVÖ = Select and confirm.
$XGLRÖÖÖÖÖÖÖÖÖÖÖ =
5LQJHU9ROXPHÖÖÖ = Select and confirm.
Ringer volume = Select and confirm the required ringer volume.
#
and
$
The phone is in standby.
Setting the loudspeaker volume
 Call the menu.
< 6HWWLQJVÖ = Select and confirm.
$XGLRÖÖÖÖÖÖÖÖÖÖÖ =
< 9ROORXGVSHDNHU = Select and confirm.
Volume = Select and confirm the required loudspeaker volume.
#
and
$
The phone is in standby.
® The base station telephone and all registered hand-
sets ring with the melody selected for each call
number (MSN) when external calls are received,
see page 90.