Siemens 3035isdn - Manual (Page 81)

142
Press the keys in the
specified order
Appendix
17.5.00 Anhang.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
If an answering machine is connected to the cordless TAE,
you should set the device type as “answering machine” .
This will enable you to pick up calls immediately from the
base station telephone or from a handset during recording.
Setting/
device type Forwarding effect
Telephone Fax or modem calls are not transferred
to the TAE if the service ID is also trans-
mitted.
Fax/Modem Only fax or modem calls are transferred
to the TAE if the service ID is also trans-
mitted.
Neutral All telephone calls as well as all fax and
modem calls are transferred to the TAE.
Use if no service ID is transferred.
Additional an-
swering ma-
chine During AB operation downstream of a
TAE, you can immediately pick up calls
at the base station telephone or hand-
set.
143
Appendix
17.5.00 Anhang.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Gigaset 3000 Classic handset operating procedures
Procedures from standby mode
Procedures when connection established
Activate temporary anonymous call z 
Unpark (xx = parking number) z  = xx =
Intercom activate { z  =
Room monitoring activate { z  =
Callback deactivate z 
Enter answering machine mode { 
Internal dialling {  ... { , { 
Collective call {
Activate caller list z 
Reject call waiting z 
Temp. keypad deactivate z  =
activate z  =
Subscriber
(xx = Parking number)
park z  = xx =
unpark z  = xx =
Open listening activate z 
deactivate z 
Callback activate z 
deactivate z 
Three-party conference start z 4
end z 4
Call waiting accept z 4
Accept call waiting in internal call z 4
Early pickup when ringer delayed z 4
Indirect pickup of an answering machine call z 4
End active subscriber during the enquiry call 4
Retrieve call on hold 4
Place call on hold {
Place call on hold and make external
enquiry call { 
Toggle in enquiry call {
Place call on hold and make internal
enquiry call {  ... {  , {