Siemens 3035isdn - Manual (Page 80)

140
Press the keys in the
specified order
Appendix
17.5.00 Anhang.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Restoring factory settings
You can withdraw your settings using the following menu
options
● Operational or
● Reset all .
 Call the menu.
< 6HWWLQJVÖÖÖÖÖÖÖÖ = Select and confirm.
< 6\VWHPVHWWLQJVÖ =
< 6SHFIXQFWLRQ =
'HIDXOW5HVHWÖÖ =
P = Enter the base PIN (factory setting 0000) and confirm.
2SHUDWLRQDO = To restore operational status:
● All MSNs are deleted (see page 97).
● All subscribers (base station telephone/handsets) are
unrestricted
(see page 99).
● AM PIN is reset to 0000 (see page 122).
● The ringer volume is reset (see page 69).
● The access code (exchange code) is deleted (see
page 136).
● The accounts are deactivated (see page 54).
● Call restrictions are switched off (see page 87).
● Remote operation is switched off (see page 123).
or
< 5HVHWDOO = Reset all :
In addition:
<(6 or 12 ● All PINs are reset to 0000 (see page 55, page 82).
● Directory (see page 35), caller list (see page 33), pro-
vider entries (see page 58) and short cut entries (see
page 76) are deleted.
● User-defined emergency numbers (see page 85) and
hot key numbers (see page 82) are deleted.
● Call charge settings are deleted (see page 48).
● User‘s own announcements are deleted
(see page 105).
#
and
$
The phone is in standby.
® Any previously set external call forwarding remains
active. The call forwarding message will appear af-
ter the MSN is entered. Handsets always remain
registered.
141
Press the keys in the
specified order
Appendix
17.5.00 Anhang.fm Gigaset3035isdn A31008-G3035-B101-6-7619 Korrektur: 0
Accessories
Activating setting for operation with repeater
A repeater will extend the range of the handsets connect-
ed to a base station telephone.
The following settings must be made when you register a
repeater at the base station telephone. They guarantee
that the base station telephone and repeater work togeth-
er for optimum performance.
 Call the menu.
< 6HWWLQJVÖÖÖÖÖÖÖÖ = Select and confirm.
< 6\VWHPVHWWLQJVÖ =
< 6SHFIXQFWLRQ =
< 5HSHDWHUÖÖÖÖÖÖÖ =
The display is highlighted when the function is active.
#
and
$
The phone is in standby.
Registering a cordless telephone terminal
box (TAE)
The cordless TAE connector enables you to use terminals
(device types) such as phones, answering machines (with
analog network connection), fax machines (group 2/3) or
modems without cords in the vicinity of the base station
telephone.
The procedure for registering the TAE is similar to that for
a handset. For more information, consult the operating in-
structions for the TAE.
Because analog fax machines and modems do not trans-
mit a service ID, it is possible, for example, that incoming
fax calls may not be recognised and thus could be misdi-
rected. This is why is it recommended that a separate call
number
(MSN) should be used for your fax machine/mo-
dem and that the device type should be set as ‘neutral” .
➡
® To register the repeater, you must first prepare the
base station telephone for registration (see
page 91).