Names of parts, Unit display and operation button – Sanyo C3682 User Manual

Page 59

Advertising
background image

4

NAMES OF PARTS

This illustration is based on the external view of a standard model.
Consequently, the shape may differ from that of the air conditioner
which you have selected.

This air conditioner consists of an indoor unit and an outdoor unit.
You can control the air conditioner with the remote control unit.

UNIT DISPLAY AND OPERATION
BUTTON

Avoid using radio equipment such as mobile phone near (within
4 ft. (1.2 m)) the remote control receiver. Some radio equipment
may cause malfunction of the unit.

If the trouble happens, disconnect power and restart the air
conditioner after a few minutes.

The unit’s display lamps are dimmed during operation in the NIGHT
SETBACK mode.

Air Intake

Air from the room is drawn into this section and
passes through air filters which remove dust.

Air Outlet

Conditioned air is blown out of the air
conditioner through the air outlet.

Remote
Control Unit

The wireless remote control unit controls power
ON/OFF, operation mode selection,
temperature, fan speed, timer setting, and air
sweeping.

Refrigerant
Tubes

The indoor and outdoor units are connected by
copper tubes through which refrigerant gas
flows.

Drain Hose

Moisture in the room condenses and drains off
through this hose.

Outdoor
(Condensing)
Unit

The outdoor unit contains the compressor, fan
motor, heat exchanger coil, and other electrical
components.

INDOOR UNIT

Air intakes

Remote control unit

Refrigerant tubes

Drain hose

OUTDOOR UNIT

Air outlet

Air outlet

NOTE

REMOTE
CONTROL
receiver

This section picks up infrared signals from the
remote control unit (transmitter).

OPERATION
button

When the remote control unit cannot be used,
pressing this button enables cooling operation.

Each time this button is pressed, the operation
mode changes cyclically.

OPERATION
lamp

This lamp lights when the system is in the
continuous DRY (orange), COOL (green) and
FAN (green) mode.

TIMER lamp

This lamp lights when the system is being
controlled by the timer.

LED CLEAN
lamp

This lamp lights during operation in the UV anti-
bacterial mode.

REMOTE CONTROL
receiver

TIMER lamp

OPERATION lamp

OPERATION button
(ON/OFF)

INDOOR UNIT

LED CLEAN lamp

IMPORTANT

Cooling operation

Stop

NOTE

OI-150-4-EG

01_KS3682_EN.fm Page 4 Friday, February 12, 2010 12:26 PM

Advertising
This manual is related to the following products: