Sanyo PDP42H2A - Manual (Page 10)

10
CONNECTING PLASMA MONITOR
TERMINALS OF PLASMA MONITOR
This Plasma Monitor has INPUT and OUTPUT terminals on its left and right sides and back for connecting
computers and video equipment. Refer to P13 to 15 for connections.
Side (Left)
q AV 3 IN Input Jacks
Connect video and audio outputs from a video
equipment. (Refer to P13.)
● AUDIO R and L(MONO) (RCA-type)
● VIDEO (RCA-type)
● S-VIDEO (Mini DIN 4-type)
e
COMPUTER IN Input Terminals
Connect computer and audio outputs to these terminals.
(Refer to P15.)
● AUDIO R/L (Stereo Mini Jack)
● RGB (D-SUB)
w DVI-D (HDCP/PC) IN Input Terminals
Connect DVI-D and audio outputs to these terminals.
(Refer to P15.)
● AUDIO R/L (Stereo Mini Jack)
● DVI-D (Digital)
r HEADPHONE Jack
Connect a headphone (stereo).
q
w
e
r
NOTE:
Video input jacks have the following priority.
When 2 cables are connected to one of the inputs and the other
inputs are disconnected, S-VIDEO jack has priority over VIDEO
jack.
NOTE:
The Speaker Output Terminals are provided for both sides of the
Plasma Monitor in addition to the terminals described above.