Sanyo PDP42H2A - Manual (Page 31)

31
COMPUTER MODE
Power save
Enables or disables the Power save function.
Enable the Power save function by choosing "On" with the 78
buttons.
Power save On
PC mode adjustment
7 8 Select
Return Exit M E N U STATUS
NOTE :
● The Power save function automatically reduces the Plasma Monitor's
power consumption if the computer is not operated for a certain period of
time. This function can be used when using the Plasma Monitor with a
computer conforming to the VESA DPMS (Display Power Management
Signaling) standard.
●
To activate power save, computer setup is also needed. (Refer to your
computer's instruction manual. )
Phase
Adjust when Horizontal noise lines are observed.
Adjust with the 78 buttons.
Position
Adjusts the screen position.
Adjust with the
e ed d and 78 buttons.
NOTE :
This adjustment will be required when the displayed image is unclear or
flickering.
Phase 0
Position 7 e d 8