Sharp AR-BC260 - Manual (Page 134)

SPECIFICATIONS
8-4
Reversing single pass feeder
Duplex bypass/inverter unit (optional)
Original sizes 5-1/2" x 8-1/2" to 11" x 17" (A5 to A3)
Original weight 15 to 24 lbs. (56 to 90 g/m 2 )
Capacity Up to 40 sheets (8-1/2" x 11", 21 lbs. (A4, 80 g/m 2 ))
Up to 30 sheets (8-1/2" x 14" or larger, 21 lbs. (B4 or larger, 80 g/m 2 ))
Power supply Supplied from machine
Dimensions 22-61/64" (W) x 17-9/64" (D) x 5-1/4" (H)
(583 mm (W) x 435 mm (D) x 133 mm (H))
Weight Approx. 11.9 lbs. (Approx. 5.4 kg)
Number of sheets 1 sheet (non-stack method)
Paper size Face-up output: Same as paper feed specifications of machine
Face-down output: 12"x18", 11"x17", 8-1/2"x14", 8-1/2"x13", 8-1/2"x11", 8-1/2"x11"R,
7-1/4"x10-1/2"R, 8-1/2"x5-1/2", A3W, A3, B4, A4, A4R, B5, B5R,
A5
Page weight Face-up output: 17 to 80 lbs. (64 to 300 g/m 2 )
Face-down output: 17 to 54 lbs. (64 to 200 g/m 2 )
Transport reference point Center reference point
Dimensions 6-5/32" (W) x 17-29/64" (D) x 17-1/64" (H)
(156 mm (W) x 443 mm (D) x 432 mm (H))
Weight Approx. 14.3 lbs. (Approx. 6.5 kg)
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from these values in individual units.
ApollonII_general-copy_SEC.book 4 ページ ２００４年９月６日 月曜日 午後４時５７分