Sharp AR-BC260 - Manual (Page 88)

5-10
EXPOSURE ADJUSTMENTS
This copier has seven exposure modes to choose from: AUTO, TEXT/PRTD. PHOTO, TEXT/PHOTO, TEXT,
PHOTO, PRINTED PHOTO and MAP.
[AUTO]
This is the standard initial setting for this copier. When a black and white copy is made, the exposure is automatically
adjusted to obtain the best image quality. When a full-color copy is made, the image is adjusted in the same way as
when [TEXT/PRTD.PHOTO] (initial settings) is selected.
[TEXT/PRTD. PHOTO, TEXT/PHOTO, TEXT, PHOTO, PRINTED PHOTO and MAP.]
The exposure can be manually adjusted in 9 steps.
1 Touch the [EXPOSURE] key.
2 Select [AUTO], [TEXT/PRTD. PHOTO],
[TEXT/PHOTO], [TEXT], [PHOTO],
[PRINTED PHOTO], or [MAP] depending
upon the original type.
Example:
The [TEXT/PRTD.PHOTO]
key is selected
AUTO
ORIGINAL
AUTO
EXPOSURE
AUTO 8½x11
PAPER SELECT
N
½
0
8½x11
PA
CO
A
OK
TEXT/
PRTD.PHOTO
PRINTED
PHOTO
TEXT/PHOTO
TEXT PHOTO
MAP
AUTO
READY TO COPY.
COPY
OF COPY
COLOR TONE
ENHANCEMENT
MANUAL
TEXT/
PRTD.PHOTO
TEXT
PRINTED
PHOTO
AUTO
NOTES
●
● ● ● Selecting the resolution
Six resolution settings are available for both color
copying and black and white copying, depending
on the contents of the original.
● ● ● ● Making a copy of a copy
When making a copy of a copy made on this machine,
touch the checkbox for COPY OF COPY to select the
mode. Three resolution settings are available when
this mode is selected: "TEXT/PRINTED PHOTO",
"TEXT", and "PRINTED PHOTO".
● For brighter colors in color copies, touch the
COLOR TONE ENHANCEMENT checkbox. The
following restrictions apply when color tone
enhancement is selected:
Color tone enhancement cannot be selected at the
same time as COPY OF COPY mode (above).
Brightness adjustment (page 6-15) and single color
copying (page 6-17) are not possible.
The reversing single pass feeder cannot be used. (It
can be used when making black and white copies.)
Original type Contents of the original
AUTO
Normally this setting is selected. When
a black and white copy is made, the
exposure is automatically adjusted to
obtain the best image quality. When a
full-color copy is made, the image is
adjusted in the same way as when
[TEXT/PRTD.PHOTO] (initial settings)
below is selected.
TEXT/
PRTD.
PHOTO This mode provides the best balance
for copying an original which contains
both text and printed photographs.
TEXT/
PHOTO
This mode provides the best balance
for copying an original which
contains both text and photographs.
TEXT
This mode is useful in enhancing
very low density areas of an original
or in suppressing unusually high-
density background areas.
PHOTO
This mode provides the best copies
of photographs with fine details.
PRINTED
PHOTO This mode is useful for copying
printed photographs.
MAP
This mode is useful to provide the
best shading and fine details found
on most maps.
ApollonII_general-copy_SEC.book 10 ページ ２００４年９月６日 月曜日 午後４時５７分