Sharp AR-BC260 - Manual (Page 16)

PART NAMES AND FUNCTIONS
1-6
Part names and functions of peripheral devices
Large Capacity tray (AR-LC8)
The large capacity tray provides the added
convenience of having 3,500 sheets of 8-1/2" x 11"
or A4 paper (21 lbs. or 80 g/m
2 ) available.
Stand/1 x 500 sheet paper drawer (AR-D17N)
This stand has one paper tray. It can hold
approximately 500 sheets of the recommended
paper for color (21 lbs. or 80 g/m
2 ), or
approximately 500 sheets of SHARP standard
paper (21 lbs. or 80 g/m
2 ).
Duplex module/2 x 500 sheet paper drawer (AR-D19N)
This stand includes a module for automatic
two-sided printing and two paper trays. The two
trays can hold approximately 500 sheets of the
recommended paper for color (21 lbs. or 80 g/m
2 ),
or approximately 500 sheets of SHARP standard
paper (21 lbs. or 80 g/m
2 ). To perform two-sided
printing, a duplex bypass/inverter unit (AR-RB1) is
required.
Stand/3 x 500 sheet paper drawer (AR-D18N)
This stand has three paper trays. Each tray can
hold approximately 500 sheets of the
recommended paper for color (21 lbs. or 80 g/m
2 ),
or approximately 500 sheets of SHARP standard
paper (21 lbs. or 80 g/m
2 ).
Saddle stitch finisher (AR-F13)
The finisher can deliver sets saddle stitched and
folded at the paper centerline to form a pamphlet,
edge stapled in three different modes or unstapled.
For two-hole or three-hole output, a hole punch
module must be installed.
Exit tray (AR-TE3)
The exit tray is installed on the output outlet of the
machine or the duplex tray / inverter unit.
Duplex bypass/inverter unit (AR-RB1)
This module is required to automatically turn paper
over within the machine for automatic two-sided
printing.
ApollonII_general-copy_SEC.book 6 ページ ２００４年９月６日 月曜日 午後４時５７分