Sharp AR-BC260 - Manual (Page 14)

1-4
PART NAMES AND FUNCTIONS
Exterior
Left tray (See page 5-5)
Finished sheets are deposited here.
Left side cover
Open this cover when a paper misfeed occurs in
the fusing unit or the transfer unit.
Reversing single pass feeder
This automatically feeds originals to be scanned.
The feeder can turn the original over and scan the
back side as well as the front side for support of
two-sided originals.
Power switch
Press to turn power on and off.
Front cover
Open to replace toner cartridge.
Operation panel
Center tray (See page 5-5)
Finished sheets are deposited here.
Bypass tray
Special papers (including transparency film) and
copy paper can be fed from the bypass tray.
Stand/1 x 500 sheet paper drawer *
(See page 2-7)
Stand/3 x 500 sheet paper drawer *
(See page 2-7)
Duplex module/2 x 500 sheet paper drawer*
(See page 2-8)
Paper tray
Each tray can hold approximately 500 sheets of the
recommended paper for color (21 lbs. or 80 g/m
2 ),
or approximately 500 sheets of SHARP standard
paper (21 lbs. or 80 g/m
2 ).
Left side cover release
Push this release up to open the left side cover.
Duplex bypass/inverter unit and exit tray* (See
page 1-6)
* , , and are peripheral devices. For a description of these devices, see page 1-6.
ApollonII_general-copy_SEC.book 4 ページ ２００４年９月６日 月曜日 午後４時５７分