Sharp AR-BC260 - Manual (Page 17)

PART NAMES AND FUNCTIONS
1-7
1
■ ■ ■ ■ Other optional equipment
● ● ● ●PS3 expansion kit (AR-PK4)
This kit provides compatibility of PostScript level 3
to the printer.
● ● ● ●Facsimile expansion kit (AR-FX10)
This kit must be installed to use the fax function.
● ● ● ●Fax memory (8 MB) (AR-MM9)
This adds memory for use by the fax function.
● ● ● ●256 MB optional memory (AR-SM5)
This adds memory that is used for the copy
function, printer function, and scanner function.
■ ■ ■ ■ Face-up and face-down output
After printing, the paper is delivered to the exit tray. This product has two exit trays (center tray and left tray). The
paper specifications (page 8-3) and output conditions differ for each tray; however, if the paper and output
conditions are such that the paper can be delivered to either tray, you can select the tray to which the paper will
go.
● Paper exits to the center tray face-down only.
● Paper exits to the left tray face-up only. However, if a duplex bypass/inverter unit has been installed,
face-down output is also possible. In this case, face-up or face-down output is automatically selected
according to the paper and output conditions (it is not possible to manually select face-up or face-down.)
ApollonII_general-copy_SEC.book 7 ページ ２００４年９月６日 月曜日 午後４時５７分