SanDisk CompactFlash Extreme III - Manual (Page 100)

CIS Description SanDisk CompactFlash Card OEM Product Manual
Table 6-1 Card Information Structure
Attribute
Offset Data 7 6 5 4 3 2 1 0 Content Description
CIS
Function
136h 61h LS
1
AS
2
N Ranges–1
1
Number of Ranges is 2;
Size of each address is
2 bytes; size of each
length is 1 byte. I/O Range
Format
Description
AS: Size of Addresses
0: No Address Present
1: 1Byte (8 bit)
Addresses
2: 2Byte (16 bit)
Addresses
3: 4Byte (32 bit)
Addresses
LS: Size of length
0: No Lengths Present
1: 1Byte (8 bit) Lengths
2: 2Byte (16 bit)
Lengths
3: 4Byte (32 bit)
Lengths
138h 70h 1st I/O Base Address (LSB) First I/O Range Base
is 170h 13Ah 01h 1st I/O Base Address (MSB)
13Ch 07h 1st I/O Range Length–1 8 Bytes Total ==>
170-177h
I/O Length–1
13Eh 76h 2nd I/O Base Address (LSB) Second I/O Range
Base is 376h
140h 03h 2nd I/O Base Address (MSB)
142h 01h 2nd I/O Range Length–1 2 Bytes Total ==>
376-377h
I/O Length–1
144h EEh S
1
P
1
L
1
M
0
Recommend IRQ Level
Eh = 14
IRQ Sharing Logic
Active in Card Control &
Status Register, Pulse
and Level Mode TPCE_IR
Interrupts supported,
Recommended IRQ's
any of 0 through 15(F).
S: Share Logic Active
P: Pulse Mode IRQ
Supported
L: Level Mode IRQ
Supported
M: Bit Mask of IRQs
Present
M=0 therefore bits 3-0
are single level, binary
encoded
02/07, Rev. 12.0 6-16 © 2007 SanDisk Corporation