SanDisk CompactFlash Extreme III User Manual

Page 61

Advertising
background image

SanDisk CompactFlash Card OEM Product Manual

ATA Command Description

Table 5-8

Identify Device Information

Word

Address

Default Value

Total Bytes

Data Field Type Information

163

00XXh

2

CF Advanced True IDE Timing Mode
Capability and Setting

164

001Bh

2

CF Advanced PCMCIA I/O and Memory
Timing Mode Capability

165-175

0000h

22

Reserved for assignment by the CFA

176-255

0000h

140

Reserved

a. Multiword DMA is supported by SanDisk PCMCIA. For all unsupported cases, 0100H is reported in

word 49, and 0000H is reported in words 52, 63, and 65. CompactFlash products will support multi-
word.

Word 0: General Configuration. This field informs the host that this is a non-magnetic, hard
sectored, removable storage device with a transfer rate greater than 10 Mb/sec and is not MFM
encoded. CompactFlash products report 848AH in compliance with the CFA specification.

Word 1: Default Number of Cylinders. This field contains the number of translated
cylinders in the default translation mode. This value will be the same as the number of
cylinders.

Word 3: Default Number of Heads. This field contains the number of translated heads in the
default translation mode.

Word 4: Number of Unformatted Bytes per Track. This field contains the number of
unformatted bytes per translated track in the default translation mode.

Word 5: Number of Unformatted Bytes per Sector. This field contains the number of
unformatted bytes per sector in the default translation mode.

Word 6: Default Number of Sectors per Track. This field contains the number of sectors
per track in the default translation mode.

Words 7-8: Number of Sectors per Card. This field contains the number of sectors per
CompactFlash Memory Card. This double word value is also the first invalid address in LBA
translation mode.

Words 10-19: Memory Card Serial Number. The contents of this field are right justified
and padded with spaces (20h).

Word 20: Buffer Type. This field defines the buffer capability with the 0002h meaning a
dual ported multi-sector buffer capable of simultaneous data transfers to or from the host and
the CompactFlash Memory Card.

© 2007 SanDisk Corporation

5-7

Rev. 12.0, 02/07

Advertising
This manual is related to the following products: