SATO DR300 - Manual (Page 71)

DR300 Operator Manual
69
2D Bar Code Command
2D barcode is only valid for Online mode. When setting data for PDF417, VeriCode,
DataCode. Use:
<BA> if data contains control code.
<BB> if data doesn’t contain control code.
<BB> command syntax contains data byte count to prevent the printer from
misinterpretation of the 2D barcode data.
<BA> field number data
<BB> field number data count, data
Use: <BQ> command for QR code
<BQ> Field number QR parameter QR data
2D Bar Code Type and Command Table
Bar Code Type Data Command Maximum Data Count
PDF417 <BB> 2681 bytes
VeriCode <BA> 196 bytes
Data Code <BA> 500 bytes
Maxi Code <BA> 93 bytes
QR Code <BQ> 7089 bytes
Chapter 9 - Online Programming