Sharp AR-650 - Manual (Page 117)

113
USING THE OPTIONAL FINISHER
7 When the last original has finished being
scanned, press the FINISHED key.
5 When the first original has finished being
scanned, press the YES key, set the next
original and press the START key.
. You can start scanning by pressing the
START key (you do not need to press the
YES key).
For the next and subsequent originals,
repeat step 5.
6
8 Copies exit onto the trays.
. When the finisher trays reach maximum
capacity, the following message appears:
Finisher full: Remove paper
Remove the copies from the tray and press
the START key to continue.
. To cancel copying, press the STOP key to
interrupt the copy run, then press then
MEMORY CLEAR key.