Sharp AR-650 - Manual (Page 163)

159
WHEN THE GRAPHIC SYMBOLS FLASH
9. REMOVING JAMMED STAPLES (OPTIONAL)
When staples have jammed in the stapler unit of the optional finisher, the following message
appears:
Examine stapler
Finisher
Close the front cover of the finisher, and
about 10 seconds later, open it again.
. The stapler unit will move to the specified
position.
. Do not remove the stapler unit without
performing the above procedure, or it will be
broken.
2
Open the front cover of the finisher. 1
Turn the blue lever 90 degrees to the left
to unlatch the stapler unit and pull out the
stapler unit.
3
Pull up the stapler unit. 4