Sharp AR-650 - Manual (Page 29)

25
HOW TO MAKE COPIES
When Placing the Original on the Glass
. After lifting the automatic document feeder,
place the original on the glass face down with
the bottom toward you and the left side
centered against the original scale.
. The sensor unit immediately detects the size
of the original, and selects the appropriate
paper size.
. Close the automatic document feeder slowly
after the original size has been detected.
3 Select the exposure.
. The AUTO-EXPOSURE mode is set as the
default mode, and provides the optimum
exposure automatically according to the
darkness of the original.
. If you want to select the desired exposure,
see page 46.
4 Key in the desired copy quantity.
. You can key in up to 999.
. There is no need for this when making only
one copy.
. When an incorrect quantity is set, press the
CLEAR key and key in the correct number.
1 2 3
4 5 6
7 8 9
0 C
ALL CLEAR
STOP
START
CLEAR
C
. Sometimes the following message appears:
Change direction of original
change the direction of the original on the
glass.
If the following message appears:
Set correct cassette
install the correct-sized cassette.
,
,