Sharp AR-650 - Manual (Page 33)

29
HOW TO MAKE COPIES
There are three methods available for enlargement and reduction copying.
. Using Automatic Magnification Selection (AMS):
After selecting the AMS mode and the copy size, when you place an original on the glass
or when an original is fed from the automatic document feeder, the copier automatically
detects the size of the original, and calculates the appropriate reproduction ratio.
. Specifying the original and copy sizes:
When you specify both the original and copy sizes, the copier automatically calculates the
appropriate reproduction ratio.
. Using the ZOOM keys:
The ZOOM keys Down and Up allow selection of the desired reproduction ratio in
increments of 1%.
Using Automatic Magnification Selection
5. REDUCTION AND ENLARGEMENT COPYING
Note: Remove any paper clips or staples from
originals before placing them on the
original feed tray.
Slides
2 Press the AMS key.
. The AMS key gets highlighted.
When Using the Automatic Document Feeder
4
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
. The number of originals you can load at a
time is shown below.
Letter, Letter-R, Statement-R : 60
Ledger : 30
Legal
: 35
Place the original(s) on the original feed
tray or on the glass.
3 Press the desired COPY-SIZE key.
. The selected COPY-SIZE key gets highlighted.
1 Press the ZOOM ORG.
→
COPY key.