Sharp AR-650 - Manual (Page 23)

19
HOW TO MAKE COPIES
The Reversing Automatic Document Feeder automatically feeds and copies sheet paper
originals placed on the feeding tray one at a time. This is called the “continuous feed mode.”
You can also manually feed originals in one sheet at a time. This is called the “single feed
mode.” If you have two-sided originals, the document feeder automatically reverses the
originals so that both sides can be copied.
Use originals with a paper weight in the range of 16 to 24 lb. 1
2
If the surface of the originals is so rough that they cannot
be moved when two of them are pinched between two
fingertips, or if the surface has been processed, these
originals should not be used even if the paper weight is
within the recommended range.
5
(1) Badly wrinkled or folded originals. In
particular, originals whose leading edge
is curled may not be correctly fed into the
reversing automatic document feeder.
Folded or curled originals should be smoothed out before
being set on the automatic document feeder.
(4) Clipped or stapled originals
3
(2) Carbon paper
(6) Damp originals (7) OHP film originals
(5) Torn originals (including those with holes
in them)
Do not mix originals of different widths at the same time. 4
Precautions when Feeding Originals
2. USING THE REVERSING AUTOMATIC DOCUMENT FEEDER
Do not use the following types of originals as they tend to misfeed or become damaged
in the automatic document feeder:
(3) Taped originals