Sharp AR-650 - Manual (Page 39)

35
HOW TO MAKE COPIES
2 Press the 1
→
2 key to select the function
of single-sided originals to duplexed copies.
Note: If sheets of paper are left in the automatic
duplexer, the STACK symbol flashes
and this message is shown:
Remove paper from duplexer
Pull out the automatic duplexer slowly and
remove the sheets from the inside (see page
142~145).
If this message appears:
To exit paper in duplexer:
Press HELP ,
press HELP and the sheets of paper will
automatically exit.
3
Place the originals.
. After aligning the edges of the originals, set
them face up on the original feed tray and
align the slides to the edges of the originals.
. The number of originals you can load at a
time is shown below.
Letter, Letter-R, Statement-R : 60
Ledger : 30
Legal
: 35
4
Select the desired copy size, exposure,
reproduction ratio and copy quantity.
Slides