Rs-232c command table, Power control/input mode selection, Controlling the monitor with a pc (rs-232c) – Sharp PN-E802 User Manual

Page 33

Advertising
background image

33

E

RS-232C command table

How to read the command table

Command:

Command field (See page 29.)

Direction:

W When the “Parameter” is set in the parameter field (see page 29), the command functions as described

under “Control/Response Contents”.

R The returned value indicated under “Reply” can be obtained by setting “????”, “

?” or “???+”

(repeater control) in the parameter field (see page 29).

Parameter:

Parameter field (See page 29.)

Reply:

Response (Returned value)

*1:

“●” indicates a command which can be used in power standby mode regardless of the STANDBY MODE setting.

“○” indicates a command which cannot be used in power standby mode when STANDBY MODE is set to LOW POWER.

“–” indicates a command which cannot be used in power standby mode regardless of the STANDBY MODE setting.

*2:

PN-ZB01 (optional) limitations

(A) When PN-ZB01 (optional) is not attached, (B) When PN-ZB01 (optional) is attached.

○ : The command can be used.

- : Error (ERR)

Power control/Input mode selection

Function

Command Direction

Parameter

Reply

Control/Response contents

*1

*2

(A) (B)

POWER CONTROL

POWR

W

0

Switches to standby mode.

● ○ ○

1

Returns from standby mode.

R

0 Standby mode
1 Normal mode
2 Input signal waiting mode

INPUT MODE SELECTION

INPS

W

0

Toggle change for input mode. Terminals not selected in INPUT SELECT

cannot be selected.

○ ○

1

PC DVI-D

“ERR” when AV DVI-D is selected for DVI of INPUT SELECT.

-

2

PC D-SUB

“ERR” when other than PC D-SUB is selected for D-SUB of INPUT SELECT.

○ ○

3

AV COMPONENT (BNC) / AV COMPONENT (D-SUB)

“ERR” when other than PC RGB is selected for BNC of INPUT SELECT, and

when other than AV COMPONENT is selected for D-SUB of INPUT SELECT.

○ ○

4

AV VIDEO (BNC) / AV VIDEO (D-SUB)

○ ○

6

PC RGB

“ERR” when AV COMPONENT is selected for BNC of INPUT SELECT.

-

7

AV DVI-D

“ERR” when PC DVI-D is selected for DVI of INPUT SELECT.

-

8

AV S-VIDEO

-

9

AV HDMI

“ERR” when PC HDMI is selected for HDMI of INPUT SELECT.

○ ○

10

PC HDMI

“ERR” when AV HDMI is selected for HDMI of INPUT SELECT.

○ ○

R

1 PC DVI-D

● ○ ○

2 PC D-SUB
3 AV COMPONENT
4 AV VIDEO
6 PC RGB
7 AV DVI-D
8 AV S-VIDEO
9 AV HDMI

10 PC HDMI

Controlling the Monitor with a PC (RS-232C)

Advertising
This manual is related to the following products: