Pre-ride inspection, Warning – Ski-Doo WAKE Series User Manual

Page 35

Advertising
background image

PRE-RIDE INSPECTION

WARNING

The pre-ride inspection is very important prior to operating the watercraft.
Always check the proper operation of critical controls, safety features and
mechanical components before starting. If not done as specified here,
severe injury or death might occur. Bring all safety equipment required by
local laws.

For more detailed information on these items, refer to the applicable sections.

WARNING

Engine should be off and the DESS key should always be removed from
its post prior to verifying any of the following points. Only start watercraft
once all items have been checked and operate properly.

ITEM

OPERATION

Hull

Inspect.

Jet pump water intake

Inspect/clean.

Bilge

Drain. Ensure plugs are secured.

Battery

Inspect tightness of cables and retaining
fasteners.

Fuel tank

Refill.

Engine compartment

Verify for leaks or gasoline odor. Verify fuel
exhaust components integrity.

Engine oil level

Check/refill.

Engine coolant level

Check/refill.

Steering system and side
vanes (O.P.A.S.™)

Check operation.

Throttle system

Check operation.

Shifter system

Check operation.

Variable Trim System (VTS)

Check operation.

Storage compartment covers
and seat

Ensure they are closed and latched.

Self-contained removable
storage bin

Ensure it is installed on vehicle and properly
closed and latched.

Wakeboard rack

– Ensure rack is installed properly.
– Make sure bungee cords are in good condition.
– Ensure wakeboard is installed properly.

Ski/wakeboard post

Inspect and check operation.

DESS post and engine
start/stop button

Check operation.

Ballast tanks

Ensure tanks are properly installed and latched.

________

SAFETY INFORMATION

________

33

Advertising
This manual is related to the following products: