Ski-Doo WAKE Series - Manual (Page 86)

MAINTENANCE SCHEDULE
FIRST 10 HOURS
25 HOURS OR 3 MONTHS
50 HOURS or 6 MONTHS
100 HOURS or 1 YEAR
200 HOURS or 2 YEAR
A: Adjust
C: Clean
I: Inspect
L: Lubricate
R: Replace
O: Operator
D: Dealer
To be performed by
PART/TASK NOTE
ELECTRICAL SYSTEM
Spark plug I I R D —
Electrical connections and fastening
(ignition system, starting system, fuel
injectors etc.)
I I D
DESS key/post I I D
Monitoring beeper I I D
Battery and fasteners (9) I I D
(9) Inspect level and add
electrolyte as required.
STEERING SYSTEM
Steering cable and connections I I D
Steering nozzle bushings I I D
Off-power assisted steering (O.P.A.S.) I I D
—
PROPULSION SYSTEM
Carbon ring and rubber boot (drive shaft) I I D
Impeller boot I I D
Impeller shaft seal, sleeve and O-ring I (6) D
Drive shaft/impeller splines I, L D
Sacrificial anode (if so equipped) (2) D
Reverse system/cable and connections I I D
VTS (Variable Trim System), (if so equipped) I I D
Impeller and impeller wear ring clearance I I D
(2) Inspect each month
(more often in salt
water use) and change
when necessary.
(6) At storage period
or after 100 hours of use
whichever comes first.
84
______________