Warning – Ski-Doo WAKE Series User Manual
Page 62
CONTROLS/INSTRUMENTS/EQUIPMENTS
6. When installing a wakeboard on the
rack, position wakeboard fin(s) out-
ward then secure bungee cords to
tightly hold wakeboard.
WARNING
To avoid possible injuries and cuts
from wakeboard's fin(s), always
place FIN(S) OUTWARDS.
1
F18L3GY
1. Fin outward
F18L3HY
7. After installation, pull and push
wakeboard to ensure it is tightly
secured to rack.
WARNING
If wakeboard is not properly se-
cured on rack, it could become
loose and detach unexpectedly,
creating a risk of injury to people
nearby. To avoid:
– Inspect bungee cords condition
and replace if damaged.
– Secure wakeboard properly on
rack.
– Periodically check that board is
properly attached.
F18L3IY
NOTE: When wakeboard is removed
from its rack, secure bungee cords so
that they will not move freely when rid-
ing watercraft.
60
______________