Variable trim system (vts), Storage compartment covers and seat, Wakeboard rack – Ski-Doo WAKE Series User Manual

Page 38: Ski/wakeboard post, Ballast tanks, Dess post and engine start/stop button

Advertising
background image

PRE-RIDE INSPECTION

dle position. With shift lever in reverse
position, gate should be in downward
position.

WARNING

Verify the reverse gate operation
before starting the engine.

Variable Trim System (VTS)

All RXP, RXT-X and WAKE Models

Install DESS key then push arrows
of VTS button to check nozzle move-
ment.

The VTS position indicator

movement can also be seen in the
information center.

Storage Compartment
Covers and Seat

Ensure they are closed and latched.

WARNING

Make sure seat is securely latched.

Wakeboard Rack

WAKE Models

WARNING

Ensure rack is properly secured
to watercraft body and that wake-
board is properly positioned and
secured to rack prior to using wa-
tercraft. Ensure straps are in good
condition.

Ski/Wakeboard Post

WAKE Models

Make sure ski/wakeboard post is fully
extended and locked before use.

Completely retract and lock when not
used.

WARNING

Use

caution

with

skier/wake-

boarder in tow as tow rope may
backlash to watercraft when re-
leased. Never perform a sharp
turn when towing a skier, wake-
boarder or any toy.

Ballast Tanks

WAKE Models

WARNING

Ensure tanks are properly secured
to reboarding platform prior to us-
ing watercraft.

DESS Post and Engine
Start/Stop Button

Position shift lever in neutral. Ensure
that both switches operate properly.
Start engine and stop it using each
switch individually.

WARNING

Should the DESS key loose or fail
to remain on its post, replace it im-
mediately in order to avoid unsafe
use.

36

_______

SAFETY INFORMATION

________

Advertising
This manual is related to the following products: